Superior quality library / SHELF LADDERS.
All shelf ladders are made to order so please check suitability carefully as they are non returnable
This range of timber shelf ladders is better & heavier quality than the custom made models but only available in standard sizes; Delivery is typically 10/12 working days
These are the best choice IF you do not require a custom size, they are available with parallel or tapered sides and with or without a beam at the top
Please note that these are still ladders, not furniture, therefore some marks and minor denting will usually be visible on the wood
The wood can be painted, stained, varnished etc to suit your requirements
Angle is approximately 1 in 4 (68 degrees)
Treads are 80mm deep. and overall ladder width is typically 430mm
Choose your options on the checkout order page after clicking the basket
These items are bespoke and need to be ordered online
options available at the checkout
HOOKS AND RAILS
We have the option (at the checkout) to these ladders, these can be used to hook over the edge of a bunk bed, loft opening, or rail etc.
We do not supply the rails as these are often not needed; Where required, people often have an exact idea of colour (brass, chrome etc.) and length needed and so it would get complicated and unnecessarily expensive for us to supply them. The popular solution is to use either a metal wardrobe rail and brackets, or wooden dowel and a block, or a broom handle supported at either end. These are easily obtained from most hardware stores. We cannot supply these competitively so we do not supply them.
Aluminium Ladders are standard sizes for faster delivery whilst all timber shelf ladders are made to order at little extra cost and are made in about 12 / 14 working days with parallel or tapered sides. Often used in libraries or book shops these ladders are also ideal for bunk bed access or stable semi regular loft access ladder etc. Timber shelf ladders are made of Hemlock wood and are similar to pine in appearance
Aluminium shelf Ladders are more suitable for industrial use in harsh environments wide treads (362mm), These can also be made to order. Manufactured from aluminium channels fitted with 89mm deep treads at 254mm centres. Bottom ends of channels fitted with rubber plugs. Top of ladder can be fitted with wooden crossbar or hooks. Handrails can be fitted at extra cost.
Handrails, Hooks, secureing brackets etc can be fitted, options shown at the checkout
Delivery is typically ten / twelve working days on these products
If you require a bespoke length or width please email us for a quote
If you can't find what you are looking for here, try the pole ladder section
Office Fax 0844 357 6970
Registered Office (No Showroom)
Austin White Ladders Ltd, 21a Burley Road, Oakham. Rutland. LE16 6DH - Tel 01162 160 737
National Delivery &
Collection points for various products in Essex (Maldon), Burton Upon Trent, Bristol & Sheffield.