|
|
(For trestles and staging boards click here) Ladder Safety EquipmentAccessories List
Ladder Safety Accessories & Ladder Safety Equipment:Ladder Mate £68.08+VATA safety device designed to prevent prevent the ladder base from slipping. Shown here with wheels to demonstrate how even then the base doesn't slip
Topmate £63.83+VATHas been designed to be used in conjunction with Laddermate to enhance sideways stability and improve access to difficult areas such as fall pipes, guttering and sills.
TESTED ON
LadderM8rix £69.99 Inc VAT | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
A complete Ladder Tag safety management system, checking for damage, faults and wear | |
Provides system, procedural and legal compliance | |
A life saver for a very small price | |
Easy to use and weather resistant | |
Provides a clear inspection trail giving integrity and control of work carried out | |
Saves valuable time when preparing safety audits | |
Provides a clear record of procedures to comply with statutory legislation and codes of practice | |
Essential for companies working with ISO9000 clients |
Set of 10 tags with holders and free permanent marker pen £45 + VAT ![]()
Before or failed inspection - do not use ladder
Record of inspection green / yellow face
Do not remove warning on reverse
At a glance data sheets for ladder classification, duty, uses and loading, frequency and type of ladder inspection
Details of the laddertag system components | |
Health and safety guidance and information | |
Risk assessment - a guide to key steps involved | |
Ladder register - to view details of all your ladders | |
Inspection reports in duplicate | |
Fault notification reports in triplicate | |
Spare laddertag inserts | |
Scafftag pen | |
Free wall poster |
A kit of 10 towertag holders and 20 towertag inserts with two permanent marker pens £55.00 + VAT
Tower tag ensure compliance with HSE regulations
High visibility insert provides details of inspection for all types of scaffolding tower
Fits any ladder with styles up to 85mm x 25mm | |
Simple to adjust | |
Stays permanently fitted to ladder | |
Adjust for incline in either direction 75mm up or down | |
50 positions in 3mm steps | |
UK Design & Manufacture | |
Total weight is only 1kg |
Working on an incline is no longer a problem with the Ladder Leveller. A vernier style adjustment system ensures the ladder foot is secure whatever the gradient.
It can be used together with our Stabilizer to provide maximum ladder security.
Accepted by the HSE as an alternative to footing | |
COMPLETELY stabilises the ladder | |
Standard version for all ladders over 2.5m long (special version available for shorter ladders) | |
Eliminates "bounce" | |
Easily, quickly and permanently fitted to any ladder | |
Positioned in less than 1 minute | |
Weighs only 3.6KG | |
Safe working load 150Kg | |
Folds flat alongside ladder for easy storage and transport | |
Two pairs of aircraft grade of aluminum telescopic struts | |
Can be used on uneven ground |
The HSE operation circular OC 233/3 of March 19th 1997 confirms that the ANKALAD ladder stabiliser is an acceptable as an alternative to footing a ladder
The DTI report URN 99/707 "Assessment of leaning ladder safety devices" which was produced following an assessment of over 80 different devices states that "overall, most of the stabilisers were considered to be of limited benefit. However Code DB(ANKALAD) proved to be clearly the most effective stabiliser, as the structure created by fitting the device was close to self supporting.![]()
£85.00 + Vat | ANKALAD STABILISER An Ankalad Stabiliser secures a ladder in much the same way as stabilisers secure a child's first bike. Correctly positioned it's impossible for the ladder to slide down the wall or side over sideways due to over-reaching - which is the real killer and cause of 9 out of 10 accidents. Ankalad weighs just 3.6kg (8lbs) and is built to a quality using the finest materials, namely annodised aluminium, zinc plated steel, brass, stainless steel and nylon mouldings. The Ankalad exceeded the HSE stabiliser test by 300%. |
There are many stand-offs around but a couple of features make our stand-off special
Large (120mm diameter) wheels assist in running up the wall and stop slide ways slip
A central V-notch enables the ladder to be used on corners
The stand-off is contracted of lightweight aluminium with zinc plated fixing and springs making it light and easy to use.
As with all our equipment the stand-off can be used in conjunction with our other products to provide a secure and safe working environment.![]()
(For trestles and staging boards click here)
The staging bracket attaches quickly and simply to existing ladders. When used with ladders fitted with our Ladder Stabiliser this provides an exceptionally secure and safe high level work platform which will meet the approval of your H&S Inspector.
Very strong aluminium construction
Simple to use
Low cost
Use your existing ladders
270kg load rating - evenly distributed
Available in 600mm and 900mm (2 x 450mm) widths
NEW version, conforms to BS EN13374 - Class A
more information on staging kits HERE
Click here for more information on the staging system
Complete kits of staging system including brackets, staging boards (600mm wide), handrails, posts, mid-board posts (where necessary), leading edge toe boards and end rails. NEW 2010 version, conforms to BS EN13374 - Class A)
. Kits exclude Stabilizers.
| Code | Total Length | Price Ex Vat |
Stag20 | 2.0m | £420.00+ VAT |
Stag30 | 3.0m | £466.00 + VAT |
Stag40 | 4.0m | £552.75 + VAT |
Stag50 | 5.0m | £602.25 + VAT |
Please note that for this system to comply with temporary edge protection regulations that the ladders should be tied in / fixed to the wall
For operation instruction please click here

Easyreach Aluminium Ladder Standoff, £25.00 (inc vat)
Working for long periods on a ladder leads to aching painful feet and in many cases can cause permanent foot arch damage.
The Step fits ladders with a tread rise of between 250mm and 300mm in increments of 12mm. It's constructed of zinc plated mild steel and features a checker plate pattern to stand on.
With body weight correctly positioned on the Step less strain is placed on the legs and lower back, retaining balance. This in turn reduces fatigue and stress, allowing the use of both hands to operate equipment safely. ![]()
The Roof Rack Clamp is a complete packaged product for transporting ladders safely and securely on the roof of a vehicle.
The securing bolts are long enough to hold two ladders each of three sections.
Manufactured to the same high standard as all our equipment, they can also be secured with two high quality padlocks (NOT INCLUDED) for total security. ![]()